How to Make an ATM10 Server (2026)
Set up an All the Mods 10 server step by step: how much RAM your group needs, Java 21, the one-click install, first-start fixes, joining with a matching client and updating without losing your world.
All the Mods 10 (ATM10) is a kitchen-sink pack of about 500 mods on Minecraft 1.21.1: tech, magic, exploration and a big quest book. This guide sets up an ATM10 server on ServerPrism, from choosing the RAM to updating the pack later without losing your world. In a hurry? The ATM10 server hosting page installs the pack in one click.
ATM10 at a glance
| Item | Details |
|---|---|
| Newest version | 8.5 (released 4 November 2026) |
| Minecraft | 1.21.1 |
| Mod loader | NeoForge 21.1.265 |
| Mods | 498 in the pack. The server files leave out the client-only ones, so a server runs about 470. |
| Java | 21 |
| RAM | 8 GB for a small group, 10 to 16 GB for more players |
| Source | CurseForge, with official server files |
We checked these numbers on 13 November 2026. ATM10 updates often, so the version list on the ATM10 page is the place to see the newest one.
How much RAM does an ATM10 server need?
ATM10 loads around 500 mods before the first player joins, so an empty server already uses several GB. Every player then loads the chunks around them, and bases in force-loaded chunks keep running when nobody is near. FTB Chunks, which is part of the pack, lets every player force-load their claims.
| Players | Plan | Why |
|---|---|---|
| 1 to 4 | 8 GB | The pack itself plus a few bases. |
| 5 to 10 | 10 to 12 GB | More loaded chunks and more machines running at the same time. |
| 10 or more, or heavy automation | 12 to 16 GB | Large AE2 or Mekanism setups and many force-loaded chunks. |
Most ATM10 servers we host run on 8 to 16 GB, and 12 GB is the most common size.
Java gets 80 % of your plan's memory. That is the RAM Percentage setting on the Startup tab, and the rest is room for Java itself. Don't raise it above 80 on a pack this size: Java needs memory outside its heap too, and when the whole process runs out, the server is stopped and loses everything since the last save. If you need more, move to a bigger plan instead, see How to upgrade or downgrade your plan.
Step 1: Install ATM10
On a new server: open the ATM10 page, click Get your server and choose a plan. In the checkout, the Software section already has Minecraft and ATM10 picked. Leave the version on the newest unless your group plays an older one. After payment we install the server files and the matching NeoForge version for you.
On a server you already have:
- Make a backup first, because installing a modpack replaces the server's files. Open Server Settings, then Backups, then User Backups, and click Create Backup.
- In the sidebar, under Service, click Change Runtime.
- Under Select Game & Version, choose Minecraft as the Runtime, search for "All the Mods 10" under Type / Modpack, and pick the Version.
- Click Switch Runtime, read the confirmation, tick the box and click Switch Now.
Pick "All the Mods 10 - ATM10". ATM10 Lite, ATM10 To the Sky and ATM10 Aeronautics are separate packs with their own worlds. Everything about switching is in Switching game, server type or version with Change Runtime.
Step 2: Start the server for the first time
Click Start in the Console. The first start of ATM10 takes a few minutes: NeoForge loads every mod, then the world is generated. The server is ready when the console shows a line like:
Done (95.213s)! For help, type "help"
A few things are already taken care of:
eula.txtis set, so you don't have to accept the EULA by hand.- We put the server on Java 21. If the console ever prints a
[ServerPrism]line saying the server needs another Java version, open Startup, pick Java 21 under Docker Image and start again. - The server starts from the Startup tab, not from the pack's
startserver.sh,run.shoruser_jvm_args.txt. Editing those files changes nothing. Memory comes from your plan and RAM Percentage.
Step 3: Settings worth checking
Open Files, then File Manager, and edit server.properties with the server stopped:
allow-flight: ATM10 has jetpacks and other flight items. On our installs the ATM server files already setallow-flight=true. If players are kicked with "Flying is not enabled on this server", set it totrue.view-distanceandsimulation-distance:view-distanceis how far players can see, andsimulation-distanceis how far around them machines and mobs keep working. Loweringsimulation-distanceto 6 or 8 is the easiest way to save CPU on a busy server.motd,difficultyandmax-players: up to you. Leaveserver-portalone, we set it on every start.
To decide who may join, use Player Lists under Minecraft in the sidebar (Add to whitelist, Make operator). More in Server basics: server.properties, whitelist, and ops.
Step 4: Pre-generate the world
Generating new chunks is the most expensive thing a modded server does, and ATM10 adds many structures and ores to every chunk. ATM10 doesn't ship a pre-generator, but Chunky works on the server alone, so players don't need it:
- Open Mods under Minecraft in the sidebar, search for "Chunky" and install the NeoForge version for 1.21.1. The page reminds you that you run a modpack; Chunky only works on the server, so it is safe here.
- Restart the server, then type in the Console:
chunky radius 3000
chunky start
That generates everything within 3,000 blocks of the world spawn. It takes a while and uses a few GB of disk, so run it when nobody is playing. chunky pause and chunky continue stop and resume it.
How players join
- Install ATM10 in the CurseForge app, or in Prism Launcher from its CurseForge tab.
- Pick the same pack version as the server. When the versions differ, the server refuses the connection and lists the mods that don't match.
- Big packs need more memory than a launcher gives by default. If the game crashes or freezes while loading, raise the memory in your launcher's Java settings.
- In Minecraft, choose Multiplayer, then Add Server, and paste your address. You find it on the Overview tab under Connection. See Connecting to your server and sharing it with friends.
Common first-start problems
| What you see | What to do |
|---|---|
The server stops at start and the console shows a [ServerPrism] Java line |
Pick Java 21 under Docker Image on the Startup tab. |
The server stops with Exit code: 137 and players lose recent progress |
It ran out of memory. Move to a bigger plan, and keep RAM Percentage at 80 or lower. |
| "Can't keep up!" lines in the console | Normal while the world generates for the first time. If it keeps happening, pre-generate (Step 4) and lower simulation-distance. |
| Friends see a list of mismatched mods | Their client runs another ATM10 version. Everyone needs the server's version. |
| Players are kicked for flying | Set allow-flight=true in server.properties and restart. |
| The server freezes or crashes during start | Read the last lines of the console. Our guide Modpack won't start or freezes on boot shows how to find the mod behind it. |
Keep it running smoothly
- ATM10 already ships ModernFix, FerriteCore and AllTheLeaks for memory, and spark for finding lag. When the server lags, run
spark profiler startin the console, wait a few minutes while it lags, thenspark profiler stopand open the link. It shows which machine, mob or mod uses the tick time. - Lots of lag comes from a few big machines or farms in force-loaded chunks. Ask players to unload chunks they don't need.
- Pre-generate before a launch with many players.
- More general tips: Reducing lag on your Minecraft server.
Backups and updating ATM10
- Before every update, make a backup: Server Settings, then Backups, then User Backups, then Create Backup. Lock it so it isn't rotated away. See Backing up your server.
- In Change Runtime, keep ATM10 as the Type / Modpack and pick the newer Version. The confirmation screen says Your world is kept: the
worldfolder stays, while mods, configs and scripts are replaced with the new version's. - Note any config changes you made yourself before updating, because the new configs replace them.
- Ask everyone to update their client to the same version.
Never move a world back to an older ATM10 version. If an update goes wrong, restore the backup you made in step 1.
Bringing an existing ATM10 world
Use SFTP (under Files) for big worlds. The Host, Port and Username are shown there, and SFTP has its own password: click Generate new password. Stop the server, upload your world folder, and make sure level-name in server.properties matches the folder name. The world must come from the same ATM10 version or an older one. Step by step: Uploading a Minecraft world and File Manager and SFTP.
More modpack guides
- How to Make an ATM11 Server
- How to Make a Cobblemon Server
- How to Make a GT New Horizons Server
- Browse all modpacks we install in one click
- ATM10 server hosting
Stuck? Open a support ticket with your server name and the last lines from the console, and we'll help.